01
Base prep on clay
We moisture-condition, compact, and grade the base over Blackland clay so the load spreads evenly and the pad doesn't rise or drop as the soil takes on and sheds water under it.
Proof
A job we'd put our name on
A pad sized to what it has to carry, reinforced for the load on top and based for the shrink-swell clay below, so it bears weight without lifting or settling.
Credibility comes from how it's built, not from promises. Here's the order of operations on every concrete pads & slabs job.
We moisture-condition, compact, and grade the base over Blackland clay so the load spreads evenly and the pad doesn't rise or drop as the soil takes on and sheds water under it.
Thickness follows whatever lands on the pad. A shed footprint and a shop floor under vehicles are not the same pour.
Reinforcement is matched to the job, from mesh on light pads to a rebar grid for heavy loads and for spanning movement in our expansive ground.
Under enclosed or finished slabs we lay a vapor barrier so ground moisture can't wick up through the concrete.
We place a well-proportioned mix, cut control joints, and hold a cure schedule so the heat doesn't draw strength out of the surface.
Most contractors vanish after the deposit. We pick up the phone, show up when we say, and stand behind the work after the truck leaves. The follow-through is the difference.
A foreman we know runs your job and a vetted crew does the work, managed by Lucky's, one company accountable from the first call to the final walkthrough.
COI and lien waivers on file before we break ground. The documentation that lets commercial clients pay and gives homeowners peace of mind.
Prepped subgrade, reinforced and mixed to spec for the job, and proper curing. We build credibility through the process, not promises. On concrete pads & slabs, that starts with base prep on clay.
Pads and slabs in North Texas are priced to the load and the soil: reinforcement matched to the use, a compacted base over expansive clay, and a cure held against the heat. As a starting range, most pads and slabs run about $7 to $13 per square foot depending on thickness and whether a vapor barrier is called for. We size and quote it against the load it has to carry.
It rides on the load. A shed pad is lighter than a garage or shop floor under vehicles and gear, so we set thickness and reinforcement to your actual use and account for the expansive clay underneath.
Yes. Those are heavy, point-loaded uses, so we step up thickness and reinforcement. A hot tub also needs a level, steady base that won't heave or sink as the clay moves, so the base prep matters every bit as much as the slab. Tell us the equipment and we will build the pad for it.
For enclosed or finished slabs, usually yes; it keeps ground moisture from creeping up through the concrete. We make the call based on what the slab will be used for.
Some slabs do, depending on size, location, and use, and North Texas cities differ from one to the next. We flag when a permit is likely so it is handled up front instead of surfacing later.
Concrete keeps gaining strength after it looks set. We give you a clear date to put equipment on it for your specific pour, factoring in how hot the week ran.
You'll hear back from a real person, usually the same day. No call center, no runaround, no chasing us down.
Booking up fast this season. Or call (469) 727-7120